.jpeg)
Inspection Services
Residential Home - New Construction - Commercial Inspections
Standard Residential Home Inspections
Foundation & Structure​​
Slab
Pier and Beam
Crawl Space
Visible Framing
Interior & Exterior Walls, Windows, Doors
Site Drainage
All Permanently Installed Appliances, Fixtures, & Components
​Type of Roof Covering
Gutter Systems
Penetrations
Chimneys
Skylights
Flashing
Roof
HVAC
Condenser
Heat Pump
Furnace
Evaporator
Air Handler
Ductwork
Filter
Thermostats
Water Supply
Water Heater
Drains
Vents
Faucets
Sinks
Showers
Tubs
Commode
_JPG.jpg)
Plumbing
Electrical
Service Entrance & Subpanels
Visible Wiring
Switches
Outlets
GFCI
Fixtures
Smoke & CO Detectors
Garage Door Opener
All accessible areas, systems, and components will be inspected according to the Texas Real Estate Commission’s Standards of Practice.
Phase Inspection
THREE-PART inspection during the building process.
Phase I
Pre-Pour Inspection:
​Comprehensive assessment of foundation configurations, structural steel elements, subterranean plumbing systems, and electrical conduit situated below ground level.
Report of findings provided.
Phase II
Pre-Drywall Inspection:
Comprehensive assessment of framing, outer wall covering, electrical wiring, and plumbing infrastructure.
Report of findings provided.
Phase III
Pre-Final Walk Thru:
Full TREC Inspection Report provided.
11-month Builder’s Warranty Inspection:
Similar to an existing home inspection, this involves identifying any issues that need to be resolved before the builder's 1-year warranty expires.
Full TREC Inspection Report provided.
Seller’s Inspection:
​A Seller's Inspection, commonly referred to as a Pre-Listing Inspection, entails conducting a comprehensive TREC Inspection on the property before entering into a sales contract.
Additional Inspection Services
Termite/WDI (Wood Destroying Insect) Inspections
Pool & Spa Inspections
​Non-invasive visual probe of the structure for evidence of previous and active wood destroying insects, also noting conducive conditions that should be corrected to deter infestations.
​Visual and operational evaluation of the installed vessel and equipment noting functional deficiencies and safety concerns.
Septic Systems
Well System & Water Quality Test
​Full operational evaluation of the system, including any installed above grade mechanical components, and drain field
Visual and operational evaluation of the wellhead, pump, and pressure/storage tank. A water sample is collected and transported to a state accredited laboratory for quality testing. Results are usually available within 24 hours.